Kindly note we also have ITK30-2, ITK70-1 , ITK90-1 equivalents
For fast delivery of goods, kindly please read following tips carefully before order:
Since this triode is high value and Customs declarance necessary,
for compliance with China foreigh exchange policy.
the Payment need to be paid through TT to our company bank account,
therefore, please DO NOT pay the order directly online.
please contact EECTECH through sales@eectech.store BEFORE order / BEFORE payment, we will help you to complete the order and payment fluently in a short time. thank you.
EECTECH Good quality | Good service | Trustworthy
Water-cooled triode ITK60-2, brand new, good quality, fast delivery
The ITK60-2 type electron tube is a cermet structure, meshed tungsten-tungsten cathode, high-power three-stage tube, and cooling method is core column air-cooling and anode water-cooling. The maximum operating frequency is 60MHz, the maximum anode dissipation power is 70kW, the maximum working voltage of the anode is 14kV, and the maximum output power is 180kW. It is used for industrial RF heating equipment.
ELECTRICAL PARAMETERS
Filament Voltage……………………………13V
Filament Current……………………………250A
Amplification Factor………………………23
Transconductance………………………115mA/V
Electrode Capacitances (Grounded Filament)
Cathode/ Grid………………… …… 130pF
Anode/ Grid ……………… ………… 60pF
Cathode/Anode……………………… 4 pF
MECHANICAL PARAMETERS
Mounting………………………Vertical, plate down
Height……………………………………404mm, max.
Diameter…………………………… …201mm, max.
Weight……………………………………10.6 kg, max.
Temp.@plate housing & seals…… 220℃, max.
Temp.@water outlet…………………… 60℃, max.
Cooling water inlet pressure…………≤5bar
COOLING
Core column………………………………Forced air
Air flow on tube terminal side…0.5m3/min
Plate……………………………………Water cooling
MAXIMUM RATING
Frequency……………………………………………60MHz
Plate Voltage (DC)
up to 15 MHz……………………14kV
from 15 to 30 MHz……………13kV
Control Grid Voltage(DC)…………………-1500V
Anode Current, CW………………………………25A
Control Grid Current
at full load, CW………………………4A
at no load, CW………………………6A
Plate Dissipation………………………………… 70kW
Control Grid Dissipation…………………… 1.8kW
TYPICAL OPERATING
Frequency 15 MHz 30 MHz
Plate Voltage 13 KV 11 KV
Grid bias -870 V -790 V
RF Grid Voltage 1370 V 1280 V
Anode Current 18 A 17 A
Grid Current 3.5 A 3.5 A
Anode input Power 234 KW 208 KW
Anode output Power 178 KW 141 KW
Anode Dissipation 55 KW 41.5 KW
Grid Dissipation 1.53 KW 1.5 KW
Grid resistance 250 225 Ω
Oscillator efficiency 76 % 75.4 %
SPECIAL NOTES
1. Tube Fragile! Handle With Care Please!
2. The tube must be stored in a ware house with temperature between 5℃~40℃ and relative humidity is less than 80%.
3. Before connected tubes to power supply, start the corresponding cooling systems at first. The cooling system should be powered off after powering off each electrode for 15 minutes.
4. Interelectrode insulation resistance of new tubes must be measured before it is used for the first time.
5. New tubes must be aged for 1-2 hours with rated filament voltage before it is used for the first time.
ITK3-1, ITK5-1, ITK12-1, ITK15-2, ITK30-2 also available
For delivery time:
Generally, we will dispatch the items within 10 days upon order confirmation; some items may need 20~30 days to get ready for delivery, then we will try our best to dispatch as soon as possible, or we will contact you and offer advice.
For Bulk order:
If you would like to place a bulk order, please contact us for better price and better delivery cost.
Product reviews can be carried out after the member login, please
click here to login
USD
EUR
GBP
